Acrylic, PU and laminate are the three finishes most kitchen shutters are made in. From a distance a glossy kitchen in any of them looks similar. Up close, and after a few years of Indian cooking, they behave differently: how they scratch, how they cope with heat near the hob, how they clean, and whether a damaged shutter can be repaired or only replaced.
What Are Acrylic, PU and Laminate Finishes?
- Laminate: a pressed paper and resin sheet bonded to the board; matt, textured, woodgrain or gloss
- Acrylic: a sheet of acrylic bonded to the board, giving a deep, mirror-like gloss; also available in matt
- PU (polyurethane) paint: a sprayed and cured paint finish, in any colour, gloss, satin or matt, with seamless edges
How Do They Compare?
| Laminate | Acrylic | PU paint | |
|---|---|---|---|
| Look | Wide range; gloss is less deep | Deepest gloss | Smooth, seamless, any colour |
| Scratch resistance | High | Lower; fine scratches show on gloss | Moderate |
| Fingerprints | Low on matt and textured | High on gloss | Depends on sheen |
| Heat near hob | Good | Can be affected by sustained heat | Good when well cured |
| Edges | Edge band tape | Matching edge band | Painted, seamless |
| Repair | Replace the shutter | Light scratches can sometimes be polished | Can be touched up or repainted |
| Maintenance | Easiest | Soft cloth only | Soft cloth; avoid harsh cleaners |
When Is Laminate the Best Choice?
For most Indian kitchens, especially busy ones. Laminate resists scratches, stains and heat well, comes in a huge range of colours and woodgrains, and matt or textured laminates hide fingerprints. It is the most forgiving finish for daily heavy cooking and for households with children.
When Is Acrylic Worth It?
When you want a deep, high-gloss look and the household will care for it. Acrylic's gloss reflects light beautifully and makes small kitchens feel brighter, but it shows fingerprints and fine scratches, and needs gentle cleaning. It suits wall units more than base units near the hob.
When Does PU Paint Make Sense?
When you want a specific colour, seamless edges, or a soft matt painted look. PU can be sprayed in almost any colour and its edges are painted continuously, with no edge band line. Damaged areas can be touched up, though matching an aged finish exactly is difficult.
The quality depends heavily on the spraying and curing process, so ask how and where the shutters are finished.
Can Finishes Be Mixed in One Kitchen?
Often sensibly. A common approach is laminate on the base units, which take the most wear near the hob and floor, with acrylic or PU on the wall units where gloss or colour is more visible and less handled. Keep colours related so the kitchen reads as one design. Our guide to kitchen colour combinations covers schemes.
Which Finish Copes Best With Indian Cooking?
Matt or textured laminate near the hob. Turmeric, oil splashes and steam are constant, and a finish that wipes clean with ordinary cleaning and hides small marks is the most practical. High-gloss surfaces near the hob show every splash. Our kitchen materials guide covers board choices behind the finish.
How Should You Choose a Shutter Finish?
- How heavily and how often you cook
- Whether gloss or matt suits your household
- Samples of each, held in your kitchen light
- A turmeric and oil test on spare samples
- Laminate below, gloss or colour above, if mixing
Gunmala Interiors specifies the finish unit by unit on the kitchen quotation. See also our guide to laminate vs veneer.
Frequently Asked Questions
Which is better for a kitchen: acrylic, PU or laminate?
For most Indian kitchens, laminate, because it resists scratches, stains and heat and is easy to clean. Acrylic gives the deepest gloss but needs care. PU offers any colour with seamless edges.
Does acrylic scratch easily?
More easily than laminate. Fine scratches and fingerprints show on high-gloss acrylic, so it needs soft-cloth cleaning.
Is PU finish durable?
Reasonably, when well sprayed and cured. It can be touched up if damaged, though matching an aged finish exactly is difficult. Quality depends on the finishing process.
Which kitchen finish is best near the hob?
Matt or textured laminate, which copes with heat, oil and turmeric and hides small marks.
Can I mix acrylic and laminate in one kitchen?
Yes. Laminate on base units, which take the most wear, with acrylic or PU on wall units, is a common and practical combination.
Which finish shows fingerprints least?
Matt and textured laminates. High-gloss acrylic and gloss PU show fingerprints most.
Can damaged kitchen shutters be repaired?
PU can be touched up or repainted; light acrylic scratches can sometimes be polished; damaged laminate usually means replacing the shutter.
Do PU shutters have edge bands?
No. PU edges are painted continuously, giving a seamless look. Laminate and acrylic use matching edge band tape.
Key Takeaways
- Laminate is the most forgiving finish for Indian kitchens.
- Acrylic gives the deepest gloss but shows fingerprints and fine scratches.
- PU offers any colour with seamless edges, and can be touched up.
- Matt or textured laminate near the hob.
- Laminate below, gloss above, is a practical mix.
See our guide to kitchen colour combinations, or book a site visit to see finishes on site.