Builders hand over a flat with electrical points positioned for an empty room. Once furniture arrives, some of those points end up behind a wardrobe, some are too far from where you need them, and the places where you need power most have none. Planning switches and sockets around the furniture layout, before the electrician starts, is the cheapest fix in the whole fit-out.
What Electrical Points Do Builders Usually Provide?
A basic set: a switch board near each door, one or two light points per room, a fan point, a few sockets, and points for an AC, geyser and kitchen appliances. These are positioned before anyone knows where your bed, sofa, TV or wardrobe will go.
So the first step is to mark your furniture layout on a floor plan, then walk the flat with it and note every existing point: is it where you need it, behind furniture, or missing altogether?
At What Height Should Switches and Sockets Be?
Switches at a comfortable reach when standing, usually around hand height beside the door. Sockets depend on use:
| Point | Usual position |
|---|---|
| Room switch board | Hand height, on the side the door opens to |
| General sockets | Low on the wall, near where appliances sit |
| Bedside sockets and switches | Just above the side table |
| Kitchen counter sockets | Above the counter and backsplash level |
| Study desk sockets | Just above the desk top |
| TV sockets | Behind the TV at mounting height, plus inside the console |
The common theme: put a socket where the plug will actually be used. A socket at floor level behind a desk means a cable dangling down the wall.
Which Points Does Each Room Need?
- Living: TV wall (power and data behind the TV, power in the console), sofa ends for lamps and chargers, AC
- Bedroom: both bedsides (charging and two-way switch for main lights), dressing table (hair dryer), wardrobe light, AC
- Kitchen: fridge, chimney, microwave, water purifier, mixer and kettle at counter height, under-cabinet lights, dishwasher if used
- Study: several sockets at desk height, data point, task light
- Foyer: light switch reachable from the door, a socket for a lamp or mirror light
- Utility: washing machine, dryer if used, iron
- Pooja unit: a hidden point for its lighting
Our room-by-room plans for a 2BHK and 3BHK show where these fit in the overall sequence.
Which Points Must Be Planned With the Woodwork?
Every light or socket inside or on a piece of furniture: wardrobe lights, kitchen under-cabinet lights, TV console power, backlit panels, pooja unit lights, dressing mirror lights, and study desk sockets.
These points are positioned by the electrician but used by the woodwork. If the two are planned separately, the point ends up a few inches from where the unit needs it. The fix is a single drawing that shows both. Our guide on lighting a new flat covers the lighting side.
What Happens to Points Behind a Wardrobe?
They have to be moved, capped, or the wardrobe has to be cut around them. A switch board behind a full-height wardrobe is one of the most common problems in new flats. Moving it means chasing the wall and repainting, which is easy before painting and disruptive after.
Check every wall where a wardrobe, TV panel, headboard panel or kitchen unit will go, and decide what happens to each point on it.
Are Modular Switches Worth Upgrading To?
Often, yes, in the rooms you use most. Modular switch plates let you combine switches, sockets, USB chargers, dimmers and fan regulators in one neat plate, and come in finishes that match the room.
- Dimmers for living and bedroom lights
- USB charging sockets at bedsides and desks
- Labelled switches on boards with many lights
- Consistent finish across the flat
Ask for the switch brand and range to be named on the quotation, as with any other hardware.
Which Electrical Mistakes Are Expensive to Fix Later?
- Switch boards ending up behind wardrobes or TV panels
- No socket behind the TV at mounting height
- No bedside switch for the main lights
- Too few kitchen sockets at counter height
- No points for wardrobe, under-cabinet or pooja lights
- LED drivers sealed inside the false ceiling with no access
All of these are cheap to get right on paper and expensive once walls are painted and furniture is fixed.
How Should Electrical Planning Be Done?
Furniture layout first, then a marked-up electrical drawing showing every switch, socket and light, then a site walk with the electrician to mark positions on the walls before any chasing. Electrical work comes before the false ceiling and painting.
On a turnkey fit-out, Gunmala Interiors prepares the electrical drawing alongside the woodwork and ceiling drawings, and our partner electricians work to it, so the points are where the furniture needs them. Major rewiring and changes to the building's supply are outside our scope.
Frequently Asked Questions
What height should switch boards be?
Room switch boards are usually at comfortable hand height beside the door, on the side the door opens to. Sockets should be where the plug is used: just above the side table, desk or kitchen counter, or behind the TV at mounting height.
How many sockets does a bedroom need?
At least one at each bedside for charging, one at the dressing table for a hair dryer, points for any wardrobe or headboard lighting, and the AC point. A two-way switch at the bedside for the main lights is also worth adding.
How many electrical points does a kitchen need?
Points for the fridge, chimney, microwave, water purifier, mixer and kettle at counter height, under-cabinet lights, and a dishwasher if used. Builders usually provide too few.
What if a switch board is behind my wardrobe?
It has to be moved, capped, or the wardrobe cut around it. Moving it before painting is easy; after painting it means chasing the wall and repainting.
Are modular switches worth it?
In the rooms you use most, often yes. They combine switches, sockets, USB chargers, dimmers and regulators neatly, in finishes that match the room.
When should electrical planning happen?
After the furniture layout is fixed and before the electrician starts chasing walls. Electrical work comes before the false ceiling and painting.
Which points must be planned with the woodwork?
Any light or socket inside or on furniture: wardrobe lights, under-cabinet lights, TV console power, backlit panels, pooja unit lights, dressing mirror lights and desk sockets.
Does Gunmala Interiors do electrical work?
On turnkey fit-outs, yes: electrical points for the interior layout through partner electricians, drawn together with the woodwork and ceiling. Major rewiring and changes to the building supply are outside our scope.
Key Takeaways
- Builder points are placed for an empty room; re-plan them around your furniture.
- Put sockets where plugs are used: bedside, desk, counter, behind the TV.
- Plan every point inside woodwork on the same drawing as the woodwork.
- Check every wall that will get a wardrobe or panel for hidden points.
- Electrical work comes before ceiling and paint. Fix it on paper first.
See our guide to lighting a new flat, or book a site visit to plan your electrical layout.