A precise quotation only protects you if what arrives matches it. Most firms deliver what they quote. But board grades, hardware ranges and laminate thickness are easy to substitute and hard to notice once furniture is built. Knowing where to look, and checking before installation, takes minutes and removes the doubt.
Where Do Material Substitutions Usually Happen?
| Item | Quoted | Possible substitution |
|---|---|---|
| Board | A named grade and brand | A lower grade or unbranded board |
| Hardware | A named brand and range | A cheaper range of the same brand, or a lookalike |
| Laminate | A specified thickness and brand | A thinner sheet |
| Edge banding | All edges, specified thickness | Hidden edges left bare, thinner tape |
| Back panels | A specified thickness | Thinner panels |
Why Does the Specification Come First?
Because you can only check against something written down. If the quotation says "branded hardware" or "good ply", there is nothing to verify. Our guide to what a woodwork quotation must say lists the lines that make verification possible.
How Do You Check Boards?
Many board manufacturers print or stamp their brand, grade and standard on the sheet. Ask to see full sheets before cutting, or check offcuts and unseen faces. Look at the edge of a cut board: the core should be consistent, without large gaps or voids. Our board grade guide explains what each grade is for.
How Do You Check Hardware?
Branded hinges and runners usually carry the maker's mark on the metal. Compare the model with the specification, and check the packaging before fitting. Lookalike hardware often has no mark, lighter metal and a rougher action.
What About Edge Banding and Back Panels?
Open a few units and check the hidden edges, the back edges of shelves and the inside of the carcass. Every edge should be banded. Tap the back panel; very thin panels flex easily. Our guide to telling good woodwork from bad covers more checks.
When Should You Check Materials?
- At delivery, before installation
- During installation, when hidden faces are visible
- At handover, against the specification
Checking at delivery is easiest; once units are built in, hidden faces are hard to see. Our final payment checklist covers handover.
What Should You Do If Something Does Not Match?
Raise it calmly in writing with photos, referring to the line in the specification. Sometimes there is a reason, such as a discontinued product replaced with an equivalent, which should have been agreed in writing first. A good firm will either correct it or explain and document the change. Gunmala Interiors names every material by brand and grade on the quotation, so it can be checked.
Frequently Asked Questions
How do I know if my interior materials were downgraded?
Compare what arrives with a written specification: board brand and grade markings, hardware maker marks and models, laminate thickness, edge banding coverage and back panel thickness.
How can I check plywood quality?
Look for the manufacturer's brand and grade marking on the sheet, and check cut edges for a consistent core without voids.
How can I check if hardware is genuine?
Branded hinges and runners usually carry the maker's mark. Compare the model with the specification and check the packaging before fitting.
When should materials be checked?
At delivery before installation, during installation when hidden faces are visible, and at handover.
What if the quotation says only "branded hardware"?
There is nothing specific to verify. Ask for brand and model to be written before signing.
Should hidden edges be edge banded?
Yes. Every edge, including hidden ones, should be banded to keep moisture out.
What should I do if materials do not match?
Raise it in writing with photos and the specification line. Any substitution should be agreed in writing beforehand.
Can a firm substitute a discontinued material?
Yes, with an equivalent agreed in writing before it is used.
Key Takeaways
- You can only verify against a precise specification.
- Check board markings, hardware marks and edge banding.
- Check at delivery, before units are built in.
- Raise mismatches in writing with photos.
- Any substitution should be agreed in writing first.
See our guide to what a quotation must say, or book a site visit.