← All Wardrobes Guides Wardrobes

Modular Wardrobe Design for a New Flat in Bangalore: How to Plan Each Bedroom

A modular wardrobe is designed from the inside out. The shutter finish is what you see in the brochure, but whether the wardrobe works is decided by its depth, its height, and how the inside is divided. Get those right for each person who will use it, and the finish is a matter of taste. Get them wrong, and no finish will fix it.

Why Should Wardrobe Design Start From the Inside?

Because the inside is where the use is. Two wardrobes with identical shutters can hold very different amounts, depending on how the hanging space, shelves and drawers are arranged.

Start with what the wardrobe has to hold. For each person: how much is hung (shirts, trousers, dresses, suits), how much is folded (t-shirts, everyday wear), how much is long and hung (sarees, long dresses, coats), and how much is small and needs drawers (accessories, innerwear, jewellery). Indian wardrobes usually need more folded storage and more saree or dupatta storage than catalogue layouts assume.

Our guide to wardrobe internals for Indian clothing goes into the layouts that hold sarees, kurtas and folded wear well.

How Should Each Bedroom's Wardrobe Differ?

By who uses it and how that will change. The same flat often needs three quite different wardrobes.

BedroomDesign priorityCommon mistake
MasterFull height, split between two users, generous drawersEqual halves when one person owns far more
Child's roomAdjustable shelves and rods that move as the child growsFixed child-height rails that are wrong within three years
Parents' roomEverything within easy reach, little or no loftHigh lofts and deep low drawers that are hard to use
Guest or study roomModest capacity, space for linen and suitcasesOver-building storage in a room that is rarely used

For a room whose use will change, fit the wardrobe for the later use. A guest room that will become a child's room in two years should get a wardrobe that suits the child.

Should the Wardrobe Go to the Ceiling or Have a Loft?

Use the full height either way. The space above head height is where suitcases, seasonal clothes and spare bedding live, and in a Bengaluru flat that has no other storage room, losing it is a real cost.

There are two ways to use it:

  • One tall unit to the ceiling, with long shutters. It looks cleaner and has no visible joint. Tall shutters need good hinges and a stable board, because a longer door is more prone to warping
  • A main wardrobe with a separate loft above, with shorter shutters on each. It is easier to make and fit, and the loft shutters can be lighter. The joint between them is visible

For parents or anyone who should not be climbing, keep the most-used storage between knee and shoulder height and treat the loft as long-term storage only. Our guide to wardrobe dimensions covers depths and heights in detail.

Hinged or Sliding Doors for a New Flat?

It depends on the clearance in front of the wardrobe, more than on looks. Hinged doors need space to swing open. Sliding doors need none, but they only let you see half the wardrobe at a time and depend on the quality of the track.

SituationUsually better
Bed close to the wardrobe wallSliding
Room with enough space to open doors fullyHinged
Need to see the whole wardrobe at onceHinged
Wide wall, wish for a clean continuous frontSliding
Lowest long-term maintenanceHinged

Sliding wardrobes depend heavily on track and roller quality. A cheap sliding system is the most common source of wardrobe complaints a few years in. Our comparison of sliding and hinged wardrobes goes into the trade-offs.

Which Board and Finish Suit a Bengaluru Wardrobe?

A board that copes with humidity, and a finish you are happy to live with for a decade. Bengaluru has two monsoon seasons and humid spells in between, and a wardrobe against an outside wall or a bathroom wall sees more moisture than the rest of the room.

For the carcass, the box that holds everything, a good-quality plywood or HDHMR board is the usual choice. For wardrobes on walls shared with a bathroom, moisture resistance matters more. Our guide to BWP, MR and HDHMR boards covers which grade belongs where, and our guide to what a wardrobe carcass is explains why the box matters more than the doors.

For shutters, laminate is the most durable everyday choice; acrylic and lacquered finishes look richer and need more care. Edge banding should be on every edge, including the ones you cannot see, because bare edges are where moisture gets in. Our comparison of wardrobe shutter finishes covers each one.

What Hardware Decisions Matter?

The hinges, drawer runners and, on sliding wardrobes, the track and rollers. These are the parts that move every day, and they wear out long before the board does.

  • Soft-close hinges are now standard on good wardrobes, and worth having on every hinged door
  • Drawer runners should be full-extension, so you can reach the back of the drawer, and rated for the weight they will carry
  • Hanging rods need support at sensible intervals; a long unsupported rod bends under a full load of clothes

On a quotation, hardware should be named by brand and model, not just brand, because every major brand sells ranges at very different performance levels. Our guide to wardrobe hardware brands covers what to look for.

What Should Be Decided Before the Electrician Arrives?

Any lighting or power the wardrobe needs, and the position of every switch and socket on the wardrobe wall. These have to be settled before the wardrobe is drawn, because the wardrobe is made to fit around them.

  • Lighting inside the wardrobe, if you want it, needs a power point positioned for it
  • A dressing area or mirror light needs its own point
  • Switches and sockets on the wardrobe wall must either be moved or have the wardrobe planned around them
  • An AC unit above the wardrobe wall affects the loft height and needs access for servicing

This is the most common and most expensive wardrobe planning error: a socket that turns out to be behind a wardrobe panel after the wardrobe has been made.

When in the Fit-Out Should Wardrobes Be Made and Fitted?

Measured early, made in the factory while the site work goes on, and fitted after painting. Final measurements should be taken once the walls are in their finished state, because plaster and putty change the dimensions slightly.

Walls in Bengaluru flats are rarely perfectly straight or square. A good installation allows for this with filler and scribe panels that close the gaps between the wardrobe and an uneven wall, rather than forcing the unit to fit. Our guide to fitting wardrobes to walls that are not straight explains how.

On a turnkey fit-out, Gunmala Interiors sequences the wardrobes with the electrical work, ceiling and painting so that each is ready when the next needs it. Where the work is wardrobes only, we work to the finished walls and existing electrical points.

Frequently Asked Questions

How should modular wardrobe design start?

From the inside. List what each person needs to hang, fold, store long and keep in drawers, then divide the wardrobe to suit. Indian wardrobes usually need more folded and saree storage than standard catalogue layouts provide.

Should a new flat wardrobe go up to the ceiling?

Use the full height, either as one tall unit or as a wardrobe with a loft above. The space above head height is valuable for suitcases and seasonal items. For older users, keep everyday storage between knee and shoulder height.

Hinged or sliding wardrobe for a new flat?

Choose by the space in front of the wardrobe. Sliding doors suit tight rooms where a bed is close to the wardrobe. Hinged doors suit rooms with space to swing them, let you see the whole wardrobe at once, and need less maintenance.

Which board is best for a wardrobe in Bangalore?

Good-quality plywood or HDHMR for the carcass, with more moisture-resistant board on walls shared with a bathroom or exposed to damp. All edges, including hidden ones, should be edge banded to keep moisture out.

What is the most common wardrobe planning mistake in a new flat?

Not settling electrical points before the wardrobe is designed. A socket or switch that ends up behind a wardrobe panel, or a missing point for interior lighting, is expensive to fix once the unit has been made.

How should a child's wardrobe be designed?

With adjustable shelves and hanging rods that can move as the child grows. Fixed child-height rails are outgrown within a few years. Design the carcass for an adult and adapt the inside.

When should wardrobes be fitted in a new flat?

After painting. They should be measured early and made in the factory while ceiling and painting work goes on, with final measurements taken once the walls are finished.

What hardware matters most in a modular wardrobe?

Hinges, drawer runners and, on sliding wardrobes, the track and rollers. These are the moving parts that wear first. Ask for them to be named by brand and model on the quotation, not just by brand.

Key Takeaways

  • Design the inside first. The shutter finish is the last decision, not the first.
  • Each bedroom needs a different wardrobe; fit it for the use the room will have in five years.
  • Use the full height. The space above head height is the flat's long-term storage.
  • Choose hinged or sliding by clearance in the room, not by looks.
  • Moisture-resistant board near bathroom walls, and edge banding on every edge.
  • Settle lighting and switch positions before the wardrobe is drawn.
  • Fit wardrobes after painting, with filler panels for walls that are not straight.

See our wardrobe service page, or book a site visit to plan wardrobes for each bedroom.

Book a site visit

Tell us about the home and where you are with it. We visit, measure, talk through what each room needs, and quote per square foot of the work actually done.

About this guide. This is general guidance for people planning interiors, not a quotation or a design for your home. Every flat differs in layout, size, builder specification and the choices you make, and all of those change the work involved. Gunmala Interiors prices per square foot of the work actually done, measured during a site visit, so nothing here should be read as a fixed price, a fixed timeline, or a commitment for your home. Material rates and availability also move over time. For a figure you can rely on, book a site visit.