Paint is only as good as the wall under it. A smooth, even finish comes from preparation: dealing with damp, filling and levelling with putty, sanding, and priming. Each step is invisible once the paint is on, which is why it is the step most often rushed. When it is rushed, it shows within a year as patches, flaking and uneven sheen.
What Does Wall Putty Do?
Wall putty is a fine filler applied over plaster to level small dents, hairline cracks and surface roughness, giving a smooth base for paint. It also helps paint bond evenly.
Putty is not a fix for damp, structural cracks or loose plaster. It smooths a sound wall; it cannot make an unsound wall sound.
What Are the Stages of Wall Preparation and Painting?
| Stage | What happens | What to check |
|---|---|---|
| Inspection | Walls checked for damp, cracks, loose plaster | Any damp source identified and fixed first |
| Surface cleaning | Dust, loose material and old flaking paint removed | No powdery surface left |
| Primer (where needed) | A base coat that seals the surface before putty | Even coverage |
| Putty coats | Usually two thin coats, each dried | Thin, even coats, not one thick one |
| Sanding | Putty sanded smooth | Shine a torch along the wall to see ridges |
| Primer | Seals the putty, evens absorption | Uniform look before colour |
| Paint coats | Usually two finish coats | Even colour, no patchiness |
The exact sequence depends on the wall's condition and the products used. A new builder-finished wall may already have putty and primer; an older or repaired wall needs more.
Why Must Damp Be Fixed Before Putty?
Because putty and paint over damp will bubble, flake and grow mould, usually within one monsoon. Common signs are dark patches, peeling paint near the floor or ceiling, a musty smell, or a white powdery deposit.
Damp has a source: a leaking pipe, a bathroom on the other side, rain entering through an outside wall, or water from the flat above. That source has to be fixed first, and it is civil, plumbing or waterproofing work. Gunmala Interiors does not do that work; we check for damp during the site visit and tell you before we quote, so the painting is not done over a problem.
How Many Coats of Putty Are Needed?
Usually two thin coats, with sanding between and after. Thin coats dry evenly and bond well. A single thick coat dries unevenly and can crack. On a very uneven wall, a third spot coat may be needed in problem areas.
Each coat must dry fully before the next. In humid Bengaluru months, drying takes longer, and rushing it traps moisture under the paint.
How Do You Check Wall Preparation Before Painting?
With a torch held flat against the wall. Raking light shows ridges, dents and sanding marks that are invisible in normal light, and which will show through the paint once the lights are on at night.
- Run a hand over the wall: it should feel smooth, without grit or ridges
- Check corners and around switch boards, where preparation is often skipped
- Look for hairline cracks that have not been filled
- Make sure primer covers evenly before colour goes on
Once the colour coats are on, preparation problems cannot be fixed without starting again on that wall.
How Many Coats of Paint Does a Wall Need?
Usually two finish coats over primer. Deep colours and colour changes from dark to light may need a third. One coat almost always shows patchiness, especially under side light or at night.
Our guide to wall colour combinations covers choosing colours and sheen, and our texture paint guide covers feature finishes.
Where Does Painting Fit in the Fit-Out Sequence?
After electrical work and the false ceiling, before woodwork installation, with a final touch-up after the woodwork is fitted. Painting before the ceiling means the ceiling work damages fresh paint; painting after woodwork means masking every unit.
Electrical chasing creates the most wall repair, so all point changes should be complete before putty starts. Our guide to switch and socket planning covers getting points right first time.
What Should Be Confirmed Before Painting Begins?
- All damp sources fixed and walls dry
- All electrical changes and ceiling work complete
- Number of putty coats, primer and paint coats agreed
- Paint brand, product and shade named for each room
- Sheen chosen for each room
On a turnkey fit-out, Gunmala Interiors manages painting through partner painters, with the preparation stages written into the quotation so you can check them.
Frequently Asked Questions
What is wall putty used for?
To level small dents, hairline cracks and roughness on plaster, giving a smooth base for paint and helping it bond evenly. It does not fix damp, structural cracks or loose plaster.
How many coats of putty are needed?
Usually two thin coats, each dried and sanded. A single thick coat can crack. Very uneven walls may need a spot coat in problem areas.
Is primer needed after putty?
Yes. Primer seals the putty and evens its absorption, so the paint colour and sheen come out uniform.
Can you paint over a damp wall?
No. Paint and putty over damp bubble, flake and grow mould. The damp source has to be fixed first, which is civil, plumbing or waterproofing work.
How do I check wall preparation?
Hold a torch flat against the wall so the light rakes across it. Ridges, dents and sanding marks show clearly. Also run a hand over the wall and check corners and around switch boards.
How many coats of paint does a wall need?
Usually two finish coats over primer, and sometimes three for deep colours or dark-to-light changes. One coat usually looks patchy.
When should painting happen in a new flat?
After electrical work and the false ceiling, before woodwork installation, with a touch-up after the woodwork is fitted.
Does a new builder flat need putty?
It depends on the builder finish. Some walls already have putty and primer; repaired or chased walls need fresh preparation. Check the wall condition before deciding.
Key Takeaways
- Paint is only as good as the wall preparation under it.
- Fix damp sources before any putty or paint.
- Two thin putty coats, sanded, then primer, then two paint coats.
- Check preparation with a torch held flat against the wall.
- Finish electrical and ceiling work before putty starts.
See our guide to wall colour combinations, or book a site visit to plan painting with the rest of the fit-out.