Replace the Shutters. Keep the Kitchen.
Most Bengaluru kitchens that look finished are not. The carcass is still square and dry, and only the shutters have aged. If yours is between five and fifteen years old, new shutters and hardware can be fitted to the existing box without touching your countertop, tiling or plumbing.
We survey first. Then we quote. Then we build.
Modular renovation for Bengaluru homes, priced after a survey and never before one.
Can You Replace Only the Shutters of a Modular Kitchen?
Yes, in most kitchens between five and fifteen years old. The carcass is the box fixed to your wall, and it usually outlives the shutters, because the shutters take the daily handling, steam and grease. If the carcass is square, dry and still holds a screw, new shutters and hardware can be fitted to it without disturbing the countertop, backsplash or plumbing.
That is the whole idea behind this service. You are not paying again for a box you already own. In Bengaluru, where humidity and long monsoons age the shutters faster than the structure, this is the difference between a kitchen that is finished in days and one that is rebuilt over weeks.
Where this does not apply. If the base units have swollen through, if the hinge seats no longer hold a screw, or if the layout itself no longer works for how you cook, replacing the shutters is money spent on a problem it cannot fix. We will say so at the survey.
How Do You Know If Your Carcass Is Still Good?
Five checks decide it, and we run all five during the survey while you watch. The answer is not a matter of opinion. Either the board still holds a screw or it does not, and either the openings are still square or they are not.
Base unit bottoms
The lowest shelf and the plinth fail first, because water travels down. We look for swelling, soft edges and laminate lifting away from the board. This is the single most common reason a carcass is beyond saving.
Hinge seats
New shutters are only as good as what holds them. We test whether the existing hinge screws still bite into firm board, or whether the material around them has softened and the screw simply spins.
Square and level
Carcasses move over the years. We measure the openings diagonally. If a cabinet has gone out of square, new shutters will sit with uneven gaps no matter how well they are made, and we would rather find that before you order them.
Active water source
A slow leak at the sink trap or an appliance point will destroy a new installation the same way it destroyed the old one. If we find one, it gets fixed before anything else is ordered.
Termite and borer
Bengaluru humidity plus concealed plywood means damage is often found rather than noticed. We check the concealed faces, not just what is visible with the doors open.
How long a modular kitchen usually lasts. Service life varies mostly by the board underneath, not the finish on top. Particle board typically fails first, plywood lasts considerably longer, and HDHMR longer still. If your kitchen is past ten years and the base units are soft, expect us to recommend rebuilding those units rather than refacing them.
What Gets Replaced, and What Stays
The scope is deliberately narrow, and that is what keeps the job short and the cost down. Everything on the front face is replaced. Everything structural, wet or tiled stays exactly where it is.
| Replaced | Retained |
|---|---|
| Kitchen and wardrobe shutters | Carcass and shelving, where it passes the survey |
| Hinges, including a soft close upgrade | Countertop, sink and sink cut-out |
| Drawer channels and drawer boxes | Backsplash and wall tiling |
| Handles and profiles | Plumbing and drainage runs |
| Internal accessories, baskets and organisers | Electrical points and appliance positions |
| Edge banding on exposed carcass edges | Flooring and skirting |
Countertop replacement is possible alongside a shutter job but is quoted separately, because it changes both the timeline and the amount of dust in your home.
What Does Kitchen Shutter Replacement Cost in Bangalore?
We price per square foot of the work actually done, measured at the survey. There is no fixed rate per shutter, because the rate itself moves with quantity. Sheet materials come in fixed sizes, so a job needing ten and a half sheets buys eleven, and the offcut is carried by that job rather than the next one. A larger, simpler run therefore prices better per square foot than a small one with many odd sizes.
| Shutter finish | Relative cost | What puts it there |
|---|---|---|
| PVC | Entry | Lowest material cost, limited finish range, suits utility runs |
| Laminate | Mid | Very wide range, so cost varies more by brand and thickness than by anything else |
| Membrane | Upper mid | One pressed skin over a profiled base, so more machining than a flat shutter |
| Acrylic | Premium | Higher material cost and more careful handling to protect the surface |
| PU | Highest | Sprayed and cured in coats, the most labour intensive finish of the five |
Relative bands, not a price list. Where your job lands depends on area, shutter count and substrate as much as on the finish. Hardware, accessories and countertops are quoted as separate lines so you can see what each decision costs.
We do not compete on being cheapest. There will always be a lower number available somewhere. What we commit to is a fixed written quote after a physical survey, no revision to that number once you accept it, and a clear line between what is included and what is not. If a cheaper quote is genuinely comparable, take it.
How Long Will My Kitchen Be Out of Action?
A full tear-down and rebuild typically runs twenty five to thirty five working days. Shutter and hardware replacement is a fraction of that, because there is no demolition, no masonry and no drying time. You keep using the kitchen through most of the work, and we commit to a specific day count in writing after the survey.
| Stage | What happens at home |
|---|---|
| Survey | Two hours. Five carcass checks, measurements, photographs of existing condition recorded before anything is touched. |
| Quote and approval | Nothing happens at your home. You get a fixed written quote and a finish sample before you commit. |
| Manufacture | Nothing happens at your home. Your kitchen stays fully in use while shutters are made to the measured sizes. |
| Fitting | The only disruptive stage. Old shutters off, hardware replaced, new shutters fitted and aligned. Dust sheeting and single zone working throughout. |
| Handover | Alignment checked door by door, soft close set, warranty issued in writing. |
Because manufacture happens off site, the disruptive window is short. This is also why shutter work is viable during the monsoon, when demolition and wet work are not.
What Your Apartment Association Will Ask For
Most Bengaluru associations ask for advance written notice, a refundable security deposit and dues cleared before work begins. Many restrict working hours, commonly no noise in the early afternoon or after evening, with a penalty for each breach. Debris removal is usually your responsibility, not the society's.
We prepare the notice, provide worker details and identification for gate registration, and schedule the noisy stages inside your society's permitted hours. Where a deposit is required, we tell you the amount before you commit rather than after work begins.
Why this matters more than it sounds. Association rules are the most common reason renovation work stalls midway in Bengaluru apartments. Handling the paperwork properly at the start is the difference between a job that runs to schedule and one that stops on day two.
The Warranty, Stated Plainly
Renovation warranties are usually vague, because nobody wants to explain which half is covered. Ours splits the job in two and says so in writing.
| Element | Covered by us |
|---|---|
| Shutters we supply and fit | Yes. Against manufacturing and finish defects. |
| Hardware we supply and fit | Yes. Per the manufacturer's terms, which we hand over to you. |
| Our workmanship and alignment | Yes. Including realignment after settling. |
| The existing carcass we retain | No, and we will not pretend otherwise. It was not built by us and its remaining life is not ours to guarantee. |
This is the honest version. A firm that warranties your existing carcass either has not inspected it or does not intend to honour it. What we do instead is tell you at the survey how much life we think the carcass has left, and decline the job if the answer is not enough to justify new shutters.
When We Tell You to Rebuild Instead
Refacing is the wrong answer often enough that it is worth publishing the conditions. In any of these cases we will recommend rebuilding the affected units, even though it is the smaller sale for us.
The base units have swollen through
New shutters on a failing box buy you a year at most, and you pay twice.
Hinge seats no longer hold
If the board around the screw has gone soft across most of the kitchen, there is nothing sound to hang new shutters from.
The layout is the actual problem
If the working triangle is wrong or storage is in the wrong place, better looking doors will not fix how the kitchen works.
Active termite damage
Treatment comes first. Refacing over live damage conceals it rather than resolving it.
Kitchen Shutter Replacement Bangalore: FAQs
Can I replace only the shutters of my modular kitchen?
Yes, in most kitchens between five and fifteen years old. The carcass is the box fixed to your wall and it usually outlives the shutters, because shutters take the daily handling, steam and grease. If the carcass is square, dry and still holds a screw, new shutters and hardware can be fitted to it without touching your countertop, tiling or plumbing.
How do I know if my kitchen carcass is still good?
Five checks decide it: whether the base unit bottoms have swollen or delaminated, whether hinge screws still bite into firm board, whether the openings are still square and level, whether there is an active leak under the sink, and whether there is any termite or borer damage. We run all five during the survey and show you what we find.
How much does kitchen shutter replacement cost in Bangalore?
It is priced per square foot and driven mainly by the finish you choose. PVC sits at the entry end, laminate mid range, and PU highest. Hardware is quoted separately. Your actual figure comes from the site survey, because shutter count, sizes and hardware condition vary in every kitchen.
Can you change shutters without removing the countertop?
Yes. Shutters and hardware sit on the front face of the carcass, so they come off and go back without disturbing the counter, the sink cut-out, the backsplash or the plumbing below. This is the main reason shutter replacement takes days rather than weeks and produces very little debris.
How long does shutter replacement take?
A full tear-down and rebuild typically runs twenty five to thirty five working days. Shutter and hardware replacement is a fraction of that, because there is no demolition, no masonry and no drying time. We commit to a specific day count in writing after the survey, and you keep using the kitchen for most of it.
Do I need permission from my apartment association in Bangalore?
Usually yes. Most Bengaluru associations ask for advance written notice, a refundable security deposit, and dues cleared before work starts. Many restrict working hours, commonly no noise between 2 and 4 in the afternoon or after 7 in the evening, with penalties per breach. We prepare the paperwork and work inside your society hours.
What warranty do you give on replacement shutters?
We warranty what we supply: the shutters, the hardware and the workmanship. We do not warranty the existing carcass we retain, and we say so in writing rather than leaving it vague. If the survey shows the carcass will not hold up, we tell you before you spend anything on shutters.
Is replacing shutters cheaper than a new modular kitchen?
Substantially, because you are not paying for a new carcass, new countertop, new plumbing or new tiling. It is the right choice when the box is sound and the shutters have aged. It is the wrong choice when the carcass has failed, and in that case we will tell you to rebuild instead.
Key Takeaways
- In most Bengaluru kitchens aged five to fifteen years, the carcass outlives the shutters and can be kept.
- Five checks decide whether that is true for your kitchen, and we run them in front of you before quoting.
- We price per square foot of the work actually done, measured at the survey. There is no fixed rate per shutter, because the rate itself moves with quantity. Sheet materials come in fixed sizes, so a job needing ten and a half sheets buys eleven, and the offcut is carried by that job rather than the next one. A larger, simpler run therefore prices better per square foot than a small one with many odd sizes.
- Manufacture happens off site, so the disruptive window is short and the work is viable through the monsoon.
- We warranty what we supply and say plainly that we do not warranty the carcass we retain.
- If refacing is the wrong answer for your kitchen, we will tell you at the survey.
If your kitchen still works but no longer looks like it does, book a survey. You will get the five checks, an honest read on how much life the carcass has left, and a fixed written quote. Read more on choosing between finishes in our modular kitchen materials guide, or compare against a full rebuild in our modular kitchen cost guide for Bangalore.
Start With the Survey, Not the Quote
We look at the carcass before we talk about price, because the carcass decides whether this job is worth doing at all.
Tell us the age of your flat and roughly how many shutters you are looking at. We will take it from there.
Book a Carcass SurveyBook a Renovation Survey
Tell us about the kitchen or wardrobe you already have. We survey before we quote.